Description

PrimeWeld Cut60 Cut Chart provides the information you need for your best cut.

The PrimeWeld CUT60 110v 220v Plasma Cutter is excellent for CNC use. Plasma cutters that start the arc with high-frequency technology can interfere with digital electronics such as computers and cell phones, meaning welders can’t use them with a computer-controlled CNC plasma cutting table. This 60 amp plasma cutter solves that problem with a blowback pilot torch. Check out your specifications and other information about the PrimeWeld Cut60 on our website https://eagleplasma.net/product/primeweld-cut60/

 

PrimeWeld Cut60 Specifications

SPECIFICATIONS:

BREAKER SIZE:

• (120V) 30 amps
• (240V) 50 amps

PLASMA OUTPUT IN AMPS:

• Arc 120 volts: 20-30 amps
• Arc 240 volts: 20-60 amps

DUTY CYCLE:

• 60 percent @ max rating (120/240V)
• 100 percent @ 23 amps (120V)
• 100 percent @ 46 amps (240V)

AIR PRESSURE:

• 40-75 PSI

AIRFLOW REQUIRED:

• 5 CFM @ 80 PSI

AIR POSTFLOW:

• 0 to 60 seconds

WEIGHT:

• 34 pounds

 

SPECIFICATIONS TABLE

Parameter	CUT60
Inverter type	MOSFET
Input voltage	1 phase AC, 110V +/- 15%	1 Phase AC, 220V +/- 15%
Input frequency	50/60Hz	50/60Hz
Input connector type Pre-wired for NEMA 6-50P *adapter provided for NEMA 6-50 to NEMA 5-15 (for 220V or 110V operations)	5-15P NEMA *See note	6-50P NEMA
Rated input current	43	48.6
Rated output voltage	92	104
Rated output current	20-30	20-60
No-Load voltage	255V
Arcing start mode	Non HF style non contact start
Duty cycle	60% @ 30 A/92 V 100% @ 23A/89.3 V	60% @ 60 A/104V 100% @ 46 A/98.4V
Recommended operating air pressure	55-75 psi
Nozzle inside hole (mm)	1.1mm
Cutting thickness	1/3″ (8mm)	4/5″ (20mm)
CNC port	yes
2T/4T	yes
Air post flow timer	0-60s adjustable
Set air	yes
Efficiency	>=80%
Power factor	0.73
Insulation grade	F
Ingress protection rating (IP)	IP21
Weight	15.20 kg / 33.51 lbs
Overall dimensions	520 x 265 x 420 mm / 20.47 x 10.43 x 16.54 inches

PrimeWeld Cut60 Cut Chart

Eagle Plasma Support: https://eagleplasma.net/support/